web-dev-qa-db-fra.com

Comment installer une deuxième carte graphique et utiliser 4 moniteurs?

J'ai finalement décidé de franchir le pas et les fenêtres de fossé. Après plusieurs heures, tout fonctionnait parfaitement avec toutes mes applications installées. Le seul problème est que je lance 4 écrans de bureau avec 2 adaptateurs nvidia, le premier adaptateur (GeForce GT 240) avec deux écrans fonctionne parfaitement mais ne semble pas pouvoir installer le second adaptateur (GeForce GT 620). Utiliser Ubuntu 14.04 LTS (AMD64)

S'il vous plaît aidez-moi avec des instructions simples s'il vous plaît. Informations sur le terminal à suivre:

nachtland@nachtland-MS-7693:~$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GT215 [GeForce GT 240] (rev a2)
02:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 620] (rev a1)

nachtland@nachtland-MS-7693:~$ Sudo lshw -C video
[Sudo] password for nachtland: 

*-display            
       description: VGA compatible controller
       product: GT215 [GeForce GT 240]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a2
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:82 memory:fd000000-fdffffff memory:b0000000-bfffffff memory:c0000000-c1ffffff ioport:e000(size=128) memory:fe000000-fe07ffff

*-display
       description: VGA compatible controller
       product: GF108 [GeForce GT 620]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:02:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:83 memory:fb000000-fbffffff memory:c8000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:fc000000-fc07ffff
nachtland@nachtland-MS-7693:~$
driversnvidiagraphicsmultiple-monitors
10
user314533

Il est difficile d’utiliser quatre moniteurs sous Linux Mint 64, c’est mon /etc/X11/xorg.conf.

Également en utilisant le pilote binaire recommandé de Ubuntu0.0.4 nvidia-331 .113

Section "ServerLayout"

#    Screen   2  "Screen2"  LeftOf  "Screen0"
#    Screen   3  "Screen3"  LeftOf  "Screen2"
# Removed Option "Xinerama" "on"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "1"
    Option         "Clone" "off"
    # You would need one screen for each monitor
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LG Electronics W2253"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 75.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Philips 190WV"
    HorizSync       0.0 - 0.0
    VertRefresh     0.0
    Option         "DPMS"
EndSection

Section "Device"

#    Driver      "nouveau"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 730"
    BusID          "PCI:1:0:0"
Option "AddARGBGLXVisuals" "true"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 730"
    BusID          "PCI:2:0:0"
Option "AddARGBGLXVisuals" "true"
EndSection

Section "Screen"

#    DefaultDepth    24
#    SubSection     "Display"
#        Depth       24
#    EndSubSection
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "DVI-I-1: nvidia-auto-select +0+0, HDMI-0: nvidia-auto-select +1920+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

#    DefaultDepth    24
#    SubSection     "Display"
#        Depth       24
#    EndSubSection
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "DVI-I-0: nvidia-auto-select +1280+0 {rotation=right}, VGA-0: nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Peut-être que ça va aider, parce que c'était la chose la plus difficile à obtenir

1
netdias