Le terminal ferme immédiatement après l'ouverture. (Après la mise à niveau vers Ubuntu 16.04 LTS)

Question

J'ai mis à jour mon ubuntu de 14.04 LTS à 16.04 LTS après chaque ouverture de gnome-terminal avec Ctrl+Alt+T ou xterm ou uxterm il se ferme immédiatement. J'ai essayé toutes les solutions sur le terminal se ferme immédiatement après ouverture et http://ubuntuforums.org/showthread.php?t=1684949 mais cela n'a pas fonctionné.

Le terminal se ferme si vite que je ne peux pas non plus voir de message d'erreur.

Lorsque j'ai essayé de me connecter à la console tty après m'être connecté correctement, il demande à nouveau un nom d'utilisateur et un mot de passe, semble bloqué dans une boucle infinie.

Bien que je puisse ouvrir un nouveau terminal avec la commande env Shell=/bin/sh gnome-terminal Alt+F2 m e n u.

Toute aide est appréciée. J'ai copié le contenu des fichiers ~/.bashrc, ~/.profile,/etc/profile, /etc/bash.bashrc ci-dessous.

fichier .zshrc

# Path to your oh-my-zsh installation.
export ZSH=/home/vikrant/.oh-my-zsh

# Set name of the theme to load.
# Look in ~/.oh-my-zsh/themes/
# Optionally, if you set this to "random", it'll load a random theme each
# time that oh-my-zsh is loaded.
ZSH_THEME="gnzh"

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion. Case
# sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"

# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_ZSH_DAYS=13

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
# Example format: plugins=(Rails git textmate Ruby lighthouse)
# Add wisely, as too many plugins slow down Shell startup.
# plugins=(git)
plugins=(Sudo git z themes ubuntu zsh-syntax-highlighting)

# User configuration

  export PATH="/home/vikrant/software/arcanist/arcanist/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/usr/lib/jvm/Oracle_jdk8/bin:/usr/lib/jvm/Oracle_jdk8/db/bin:/usr/lib/jvm/Oracle_jdk8/jre/bin"
# export MANPATH="/usr/local/man:$MANPATH"

source $ZSH/oh-my-zsh.sh

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-Arch x86_64"

# ssh
# export SSH_KEY_PATH="~/.ssh/dsa_id"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"

export PATH="/home/vikrant/software/arcanist/arcanist/bin:$PATH"

# Base16 Shell
BASE16_Shell="$HOME/.config/base16-gnome-terminal/base16-default.dark.sh"
[[ -s $BASE16_Shell ]] && source $BASE16_Shell

export WORKON_HOME=~/.py_envs
mkdir -p $WORKON_HOME
source /usr/local/bin/virtualenvwrapper.sh
export PATH="/home/vikrant/.arc/arcanist/bin/:$PATH"
source /home/vikrant/.arc/arcanist/resources/Shell/bash-completion
export PATH="$PATH:/home/vikrant/Downloads/softwares/phantomjs-2.1.1-linux-x86_64/bin"

fichier .bashrc

# ~/.bashrc: executed by bash(1) for non-login shells.
# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)
# for examples

# If not running interactively, don't do anything
case $- in
    *i*) ;;
      *) return;;
esac

# don't put duplicate lines or lines starting with space in the history.
# See bash(1) for more options
HISTCONTROL=ignoreboth

# append to the history file, don't overwrite it
shopt -s histappend

# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=1000
HISTFILESIZE=2000

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# If set, the pattern "**" used in a pathname expansion context will
# match all files and zero or more directories and subdirectories.
#shopt -s globstar

# make less more friendly for non-text input files, see lesspipe(1)
[ -x /usr/bin/lesspipe ] && eval "$(Shell=/bin/sh lesspipe)"

# set variable identifying the chroot you work in (used in the Prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy Prompt (non-color, unless we know we "want" color)
case "$TERM" in
    xterm-color) color_Prompt=yes;;
esac

# uncomment for a colored Prompt, if the terminal has the capability; turned
# off by default to not distract the user: the focus in a terminal window
# should be on the output of commands, not on the Prompt
#force_color_Prompt=yes

if [ -n "$force_color_Prompt" ]; then
    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
    # We have color support; assume it's compliant with Ecma-48
    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
    # a case would tend to support setf rather than setaf.)
    color_Prompt=yes
    else
    color_Prompt=
    fi
fi

if [ "$color_Prompt" = yes ]; then
    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
else
    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
fi
unset color_Prompt force_color_Prompt

# If this is an xterm set the title to user@Host:dir
case "$TERM" in
xterm*|rxvt*)
    PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
    ;;
*)
    ;;
esac

# enable color support of ls and also add handy aliases
if [ -x /usr/bin/dircolors ]; then
    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
    alias ls='ls --color=auto'
    #alias dir='dir --color=auto'
    #alias vdir='vdir --color=auto'

    alias grep='grep --color=auto'
    alias fgrep='fgrep --color=auto'
    alias egrep='egrep --color=auto'
fi

# some more ls aliases
alias ll='ls -alF'
alias la='ls -A'
alias l='ls -CF'

# Add an "alert" alias for long running commands.  Use like so:
#   sleep 10; alert
alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"'

# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.

if [ -f ~/.bash_aliases ]; then
    . ~/.bash_aliases
fi

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if ! shopt -oq posix; then
  if [ -f /usr/share/bash-completion/bash_completion ]; then
    . /usr/share/bash-completion/bash_completion
  Elif [ -f /etc/bash_completion ]; then
    . /etc/bash_completion
  fi
fi

voici mon fichier .profile

# ~/.profile: executed by the command interpreter for login shells.
# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login
# exists.
# see /usr/share/doc/bash/examples/startup-files for examples.
# the files are located in the bash-doc package.

# the default umask is set in /etc/profile; for setting the umask
# for ssh logins, install and configure the libpam-umask package.
#umask 022

# if running bash
if [ -n "$BASH_VERSION" ]; then
    # include .bashrc if it exists
    if [ -f "$HOME/.bashrc" ]; then
    . "$HOME/.bashrc"
    fi
fi

# set PATH so it includes user's private bin if it exists
if [ -d "$HOME/bin" ] ; then
    PATH="$HOME/bin:$PATH"
fi

fichier/etc/profile

    # /etc/profile: system-wide .profile file for the Bourne Shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).

if [ "$PS1" ]; then
  if [ "$BASH" ] && [ "$BASH" != "/bin/sh" ]; then
    # The file bash.bashrc already sets the default PS1.
    # PS1='\h:\w\$ '
    if [ -f /etc/bash.bashrc ]; then
      . /etc/bash.bashrc
    fi
  else
    if [ "`id -u`" -eq 0 ]; then
      PS1='# '
    else
      PS1='$ '
    fi
  fi
fi

if [ -d /etc/profile.d ]; then
  for i in /etc/profile.d/*.sh; do
    if [ -r $i ]; then
      . $i
    fi
  done
  unset i
fi

fichier /etc/bash.bashrc

    # System-wide .bashrc file for interactive bash(1) shells.

# To enable the settings / commands in this file for login shells as well,
# this file has to be sourced in /etc/profile.

# If not running interactively, don't do anything
[ -z "$PS1" ] && return

# check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.
shopt -s checkwinsize

# set variable identifying the chroot you work in (used in the Prompt below)
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
    debian_chroot=$(cat /etc/debian_chroot)
fi

# set a fancy Prompt (non-color, overwrite the one in /etc/profile)
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '

# Commented out, don't overwrite xterm -T "title" -n "icontitle" by default.
# If this is an xterm set the title to user@Host:dir
#case "$TERM" in
#xterm*|rxvt*)
#    Prompt_COMMAND='echo -ne "\033]0;${USER}@${HOSTNAME}: ${PWD}\007"'
#    ;;
#*)
#    ;;
#esac

# enable bash completion in interactive shells
#if ! shopt -oq posix; then
#  if [ -f /usr/share/bash-completion/bash_completion ]; then
#    . /usr/share/bash-completion/bash_completion
#  Elif [ -f /etc/bash_completion ]; then
#    . /etc/bash_completion
#  fi
#fi

# Sudo hint
if [ ! -e "$HOME/.Sudo_as_admin_successful" ] && [ ! -e "$HOME/.hushlogin" ] ; then
    case " $(groups) " in *\ admin\ *|*\ Sudo\ *)
    if [ -x /usr/bin/Sudo ]; then
    cat <<-EOF
    To run a command as administrator (user "root"), use "Sudo <command>".
    See "man Sudo_root" for details.

    EOF
    fi
    esac
fi

# if the command-not-found package is installed, use it
if [ -x /usr/lib/command-not-found -o -x /usr/share/command-not-found/command-not-found ]; then
    function command_not_found_handle {
            # check because c-n-f could've been removed in the meantime
                if [ -x /usr/lib/command-not-found ]; then
           /usr/lib/command-not-found -- "$1"
                   return $?
                Elif [ -x /usr/share/command-not-found/command-not-found ]; then
           /usr/share/command-not-found/command-not-found -- "$1"
                   return $?
        else
           printf "%s: command not found\n" "$1" >&2
           return 127
        fi
    }
fi

Answer 1

J'ai compris que j'utilisais zsh comme shell par défaut. Le problème était dû à la 9ème ligne de la dernière ligne dans le fichier .zshrc.

# Base16 Shell 
BASE16_Shell="$HOME/.config/base16-gnome-terminal/base16-default.dark.sh"
[[ -s $BASE16_Shell ]] && source $BASE16_Shell

J'ai commenté ces lignes et maintenant cela fonctionne bien.